Xerox Workcentre 6027 Setup

Begin the setup for your brand new Xerox WorkCentre 6027 printer by unpacking it. Choose the desired connection type (Wi-Fi, wired, or USB cable) and perform the physical setup for the same. Turn on the printer. Configure the initial printer setup, and finally, install the Xerox printer driver on your computer to complete the setup.

XEROX WORKCENTRE 6027 WIRELESS PRINTER

The Xerox WorkCentre 6027 printer allows you to perform printer-related operations over a wireless network. This wireless printer comes with various printing features such as auto screening, bi-directional driver, collation, color balance adjustment, and more. It can be configured and used easily by anyone who has basic knowledge of printers. To know the Xerox WorkCentre 6027 setup in detail, scroll down this page.

Xerox Workcentre 6027 Setup

XEROX WORKCENTRE 6027 UNBOXING

  • Initially, position your printer in a location where you can use it comfortably.
  • Unpack the Xerox printer completely.
  • Now, choose the connection type for the printer.
  • For USB: Using a USB cable, connect your Xerox printer directly to a computer.
  • For Ethernet: Connect the printer to a network device (router or access point) using an Ethernet cable. Using another Ethernet cable, connect your computer to the same network device.
  • For Wireless: Turn on the Wi-Fi router, printer, and computer. Make sure that your printer and the computer are placed within the range of the router.
  • After choosing the desired connection type, turn on the printer.
  • Before turning on the printer, connect the fax line in between the printer and the telephone wall outlet if you wish to use the Fax function on your printer.
  • Once your printer turns on and becomes stable, configure the initial settings as per your desire.
  • Load paper in the tray when prompted.
  • The toner cartridges are pre-installed. Just make sure that you have removed the protective tape from the cartridges.
  • Finally, install the printer driver on your computer to finish the Xerox WorkCentre 6027 printer setup.

XEROX WORKCENTRE 6027 APP

The TWAIN scan application available for this printer allows you to perform the “scan to network computer,” “scan to USB,” and “scan to email” operations. This application is included along with the printer’s full feature driver package, and it is quite easy to install.

XEROX WORKCENTRE 6027 DRIVER

The Xerox WorkCentre 6027 printer driver availability varies based on your OS type. To download the printer driver for your Windows or Mac computer, locate and click on the Driver Download, Driver Download for Windows, or Driver Download for Mac button provided on this page. Based on your current OS type, the available printer driver will be downloaded.

XEROX WORKCENTRE 6027 DRIVER

The Xerox WorkCentre 6027 printer driver availability varies based on your OS type. To download the printer driver for your Windows or Mac computer, locate and click on the Driver Download, Driver Download for Windows, or Driver Download for Mac button provided on this page. Based on your current OS type, the available printer driver will be downloaded.

XEROX WORKCENTRE 6027 MANUAL

Download a soft copy of your Xerox printer’s user guide from this page by clicking the Manual Download button on this page.

HOW TO INSTALL XEROX WORKCENTRE 6027

Install your Xerox WorkCentre 6027 printer driver on your computer by following the below instructions.

  • Insert the printer setup CD or open the downloaded driver file on your computer.
  • Click Continue > I Agree > Next. Choose the directory to install the driver and additional software if prompted.
  • Similarly, when prompted, choose the desired connection type.
 
    • If your OS is macOS, then you may be prompted to enter your computer password during the driver installation. Type the password in the given field.
    • Click OK > Continue Installation.
    • Finally, perform a test print or scan operation to check whether the driver installation is done correctly.
     

HOW DO I CONNECT MY XEROX WORKCENTRE 6027 TO WIFI?

You can connect your Xerox WorkCentre 6027 to a wireless network easily using its control panel. The following instructions explain the wireless connectivity in detail.

  • Initially, make sure that your Xerox printer and the wireless router are turned on.
  • Now, initiate the Wi-Fi setup by pressing the Machine Status button on your printer’s control panel.
  • Select Tools > Admin Setting > Network > Wireless > Wireless Setup Wizard.
  • Now, the SSID of the wireless networks that are available within your printer’s range will be displayed on the screen.
 
  • Choose the SSID to which you wish to connect the printer.
  • Tap Next.
  • In the given field, enter the selected network’s security key and tap OK.
  • Once your printer is connected to the selected network, connect your computer to the same network and begin the software installation.
  • Install the software, and finally, print a test page to check whether the wireless setup has been done correctly.

WHERE IS THE WPS PIN ON MY XEROX WORKCENTRE 6027?

The WPS method usually allows the printer to be connected to a wireless router simply by pressing the WPS button. But, on the Xerox WorkCentre 6027 printer, there is no WPS button. To use WPS for wireless connection, you need to get a Wireless Print Solutions Adapter.

XEROX WORKCENTRE 6027 CLEANING

The cleaning process helps to improve the print quality and avoid some common printer-related issues. The following instructions will help you in cleaning your Xerox WorkCentre 6027 printer.

Cleaning the printer’s scanner glass

  • Turn off your Xerox printer if it is turned on.
  • Now, get a soft, lint-free cloth.
  • Dip the cloth in a glass of cleaning liquid.
  • Open the printer’s scanner glass.
  • Clean the glass with the cloth dipped in the cleaning liquid.
  • After cleaning the glass, leave it for some time to dry.
  • Once the glass is dried, close the scanner cover.

Cleaning the interior parts of the printer

  • Open your Xerox printer’s side door.
  • Take the toner cartridges out of the printer.
  • Now, gently pull out the cleaning rod present inside the printer.
  • Clean the rod using the lint-free cloth.
  • After cleaning the rod, push it into the printer.
  • Place the toner cartridge back into the printer and close the side door.

Cleaning the exterior parts of the printer

  • Dip the lint-free cloth in a cleaning liquid and clean your printer’s paper tray, output tray, and control panel using it.
  • Make sure to clean the parts gently.
  • Let the cleaned parts dry and then turn on the printer.

XEROX WORKCENTRE 6027 FUSER REMOVAL

  • Get a new fuser.
  • Now, turn off your printer and open its rear door.
  • Locate the fuser and release its lever.
  • Remove the fuser roller from the printer.
  • Unpack and install the new roller into the printer.
  • Lock the levers and close the rear door of the printer.

XEROX 6027 DRUM REPLACEMENT

  • Initially, make sure that you have bought the replacement toner.
  • Turn off your Xerox 6027 printer if it is turned on.
  • Open the printer’s side door.
  • Locate and remove the toner cartridge that you want to replace.
  • Now, unpack the new toner and insert it into the printer.
  • Make sure to install the toner cartridges properly in their slot.
  • Close the side door and turn on your printer.
  • Now, print a test page to check the print quality of the new toner.

XEROX WORKCENTRE 6027 TONER RESET

    Once you replace or install a new toner, the printer will automatically recognize it. You don’t need to perform the toner reset manually. But, in case your printer is not reading the toner, then perform the following instructions.
  • Reboot your Xerox printer.
  • If the printer is still not reading toner, then cancel the print queue and reboot your computer along with the printer.
  • Make sure that your printer firmware is up-to-date.
  • If necessary, clean your printer’s toner density sensor.

XEROX WORKCENTRE 6027 TROUBLESHOOTING

Some common Xerox WorkCentre 6027 printer issues and the troubleshooting instructions for the same are given below. To get remote assistance in resolving the printer issues, contact us by clicking the Call button provided on this page.

XEROX WORKCENTRE 6027 FACTORY RESET

  • In your computer browser, type the printer’s IP address.
  • Tap Enter.
  • Now, the printer’s CentreWare Internet Services window will open.
  • Click on the Properties option followed by the plus icon.
  • Go to the General menu.
  • Locate and click on the Resets option followed by Start Printer.
  • Now, your printer will start to perform the reset process.
  • Once it is completed, the printer reboots automatically.

XEROX WORKCENTRE 6027 WIFI NOT WORKING

    If your Xerox printer is not connecting to the wireless network, then follow the simple and quick solutions given below.
  • Initially, check whether the wireless network device that you have connected to your Xerox WorkCentre 6027 printer is turned on.
  • If not, turn it on.
  • Place your printer within the range of the Wi-Fi device.
  • Restart the printer followed by the wireless router.
  • Make sure that your wireless router is connected to a stable network. To confirm it, connect your computer or mobile phone to the same network and try to open a web page. If the requested page opens successfully, then your network is stable. Otherwise, the problem is with your network, and to fix it, contact your ISP.
  • Disable the firmware or security software temporarily if necessary.

XEROX WORKCENTRE 6027 ERROR CODES

An error code informs you of the problem that has occurred on your printer. As soon as an error code is displayed on the screen, press the Help button on the printer’s control panel to get more information about the displayed error. Along with some error codes, you can find the troubleshooting suggestions. In this case, perform the suggested troubleshooting instructions to clear the error. If only the error code or message is displayed on the screen, then perform the necessary solution to clear it.

The troubleshooting process will vary based on the error that has occurred. For example, if the error “Paper Jam” is displayed on the screen, then perform the following instructions.

  • Initially, remove the existing paper from the paper tray or ADF.
  • Identify the location where the paper has jammed.
  • If you find the jammed paper in the ADF, then gently remove it.
  • Make sure not to damage the jammed paper again.
  • If you’re unable to remove the jammed paper from the ADF, open your printer’s document cover and then remove it
  • After removing all the jammed paper from the printer, refill the paper tray and print a test page.
  • Similarly, perform the necessary solutions to clear the displayed error code.