Xerox D136 Printer Setup [Simple Steps]

Xerox D136 is a printer that can perform monochrome printing and copying. It can also carry out color scanning. This printer’s duty cycle is 2,000,000 pages per month. It has a full color touch-screen user interface. The printer’s standard duplex Automatic Document Feeder can accommodate 250 sheets. This printer is well-known for producing excellent quality printouts. The Xerox D136 printer setup is described in the next section. It involves both hardware and software installations.

Xerox D136 Copier/printer Unboxing Setup

Xerox D136 Printer Setup

Unboxing the printer:

  • First, open the printer box and then check whether all the components are available.
  • Next, take the printer carefully out of the box using both hands.
  • In case there are any protective materials or tapes on the outside of the printer, remove them.
  • If you find any protective tapes inside the printer, remove them as well.

Loading paper into the printer:

Trays 1 and 2 will be identical. Trays 3 and 4 are size-adjustable.

Powering on the printer:

  • Take the power cable and then connect one of its ends to the back of the printer.
  • Plug the opposite end of this power cable into an electrical outlet.
  • Press the Power button on the printer to turn it on and continue with the steps to perform the Xerox D136 printer setup.
  • You will now find the Please wait… message on the printer screen. This message shows that the printer is warming up. You cannot use the printer while it is warming up. The process usually takes around three minutes.
  • You can now continue with the cartridge installation, after which you need to load paper into the printer.

Loading paper into trays 1 and 2:

  • First, choose the appropriate paper type for your current print job.
  • Next, pull the tray slowly out of the printer until it stops.
  • Now, you need to open the ream of paper so that the seam side faces up.
  • Before you start loading the sheets, fan them well.
  • Load the ream of paper and align its edge against the tray’s left edge. Make sure that you are loading paper in the Long Edge Feed (LEF)/portrait direction.
  • You have to push the tray inside the printer until it comes to a halt.
  • Finally, choose the Confirm option to exit the current window.
  • You have now completed an important stage in the Xerox D136 printer setup.

Powering on the printer:

  • First, choose the appropriate paper stack for your current print job.
  • Next, pull the tray slowly out of the printer until it stops.
  • Now, you need to open the ream of paper so that the seam side faces up.
  • Before you start loading the sheets, fan them well.
  • Load the ream of paper and align its edge against the tray’s left edge. You can load the paper either in the Long Edge Feed (LEF)/portrait or the Short Edge Feed (SEF)/landscape direction.
  • Now, adjust the paper guides such that they lightly touch the edge of the paper in the tray. Refrain from loading paper above the MAX line on the rear Edge Guide.
  • You have to push the tray inside the printer until it comes to a halt.
  • Finally, choose the Confirm option to exit the current window.
  • You have now finished another stage in the Xerox printer setup.

Now, the hardware part of the Xerox D136 Printer setup is over. Once the software is installed, the entire setup will be complete.

Xerox D136 Driver Download

Since the driver is always the most significant program required for any printer, downloading it should be done with extreme caution. Ensure that you enter the correct information, such as the operating system and its version, while performing the driver download. The steps for the Xerox D136 driver download for the Windows and Mac operating systems are provided below.

For your convenience, the Driver Download button is also provided on this page. You can click on this button and continue with the on-screen instructions to finish downloading the most appropriate driver for your printer.

FOR WINDOWS

  • First, go to navigate to the official site of the Xerox D136 printer.
  • Next, you need to click the Drivers & Downloads tab.
  • From the drop-down provided for the Platform field, choose the Windows option along with the appropriate version.
  • From the drop-down provided for the Category field, select Drivers.
  • Similarly, fill in the rest of the fields. Once you are done, click on the red Apply Filters button.
  • On the page that displays, you will find a list of options under the Drivers title. Click on the Download button provided below the most appropriate driver.
  • Follow the rest of the on-screen instructions to finish the printer driver download for Xerox D136 Printer setup.

FOR MAC

  • First, go to navigate to the official site of the Xerox D136 printer.
  • Next, you need to click the Drivers & Downloads tab.
  • From the drop-down provided for the Platform field, choose the Mac option along with the appropriate version.
  • From the drop-down provided for the Category field, select Drivers.
  • Similarly, fill in the rest of the fields. Once you are done, click on the red Apply Filters button.
  • On the page that displays, you will find a list of options, under the Drivers title. Click on the Download button provided below the most appropriate driver.
  • Follow the rest of the on-screen instructions to finish the printer driver download.

Xerox D136 Driver Install

In this section, we shall discuss the Xerox D136 printer driver installation on a Windows computer. You can make use of the CD that came with the printer package. Follow these steps to do the same:

  • First, insert the CD into the CD/DVD drive of your computer.
  • Proceed with the on-screen instructions to finish the Xerox D136 driver installation.
  • In case you do not have the installation CD with you, make use of the steps given here:
  • On your computer, navigate to the official site of the Xerox D136 printer.
  • Depending on the OS and its version, download the most appropriate driver for your printer.
  • Now, you need to install the downloaded driver. To do the same, first, navigate to the Downloads folder on your computer.
  • Turn your attention to the latest downloaded file and double-click on it. This action will open the driver file.
  • Complete the rest of the on-screen instructions to finish the Xerox D136 printer driver installation.

Xerox D136 Printer Manual

  • On your computer, navigate to the official site of the Xerox D136 printer.
  • Click the Documentation tab.
  • Under the User Documentation title, you will find a list of manuals/guides.
  • You can click on the red Download button located below the desired manual/guide.
  • Now, you can either read the manual or save it on your computer for later use.
  • Thus, you have seen how to download the manual for the Xerox D136 printer setup.

How To Replace The Toner Cartridge On Xerox D136?

Sometimes, you might have to replace the toner cartridge on your Xerox D136 printer. You have to do it while the printer is ON. Before you start replacing the toner cartridge, confirm that the printer cools down.

  • Now, follow these steps to replace the toner cartridge:
  • First, open the left cover of the printer.
  • Next, lay a sheet of paper on the floor. This action ensures that any excess toner falls on the paper.
  • Now, get hold of the handle of the toner cartridge.
  • You have to pull out the toner cartridge very slowly. Do it carefully by holding the bottom of the cartridge using one hand. You can dispose of the old toner cartridge and continue with the steps to replace it with the new one on the Xerox D136 printer.
  • Take the new cartridge out of its box. To even out the toner inside, shake the cartridge horizontally (from side to side).
  • You need to hold the cartridge such that the arrow mark faces upwards. Now, slowly push the cartridge inside the printer until it stops.
  • You can now close the toner cover.
  • You have now successfully replaced the toner cartridge on the Xerox D136 printer.

For more assitance on Xerox D136 Printer setup and troubleshooting, click the call button provided on this page.