Lexmark X4650 Setup

Lexmark X4650 is an all-in-one printer that provides multiple ways to enhance your printing experience. The product has a wide range of features that allow the user to scan, fax, and copy documents at full capacity. Setting up the Lexmark X4650 printer is possibly one of the easiest tasks. You can easily set up the HP printer by following the steps and methods provided on this page.

Lexmark X4650 All-in-One Inkjet Printer Unboxing

  • Unpack the Lexmark X4650 printer and discard all the protective tapes from it.
  • Next, take out the printer supplies from the package and unpack the following:
  • Power cord
  • USB cable or installation cable
  • Networking guide
  • Print cartridges
  • Quick Setup sheet
  • Printer software CD-ROM
  • Pull out the paper support from the printer and move the edge guide to its maximum.
  • Take a stack of paper, even it out, and load the paper on the paper support.
  • Adjust the edge guide till it touches the loaded paper. Ensure not to damage or crush the paper.
  • Open the printer, then find and press the cartridge carrier levers.
  • Unpack the cartridge and discard all the protective tape from the cartridges.
  • Open the carrier lid, insert the cartridge in the right carrier, and close the lid.
  • Repeat the same steps to install the other print cartridges on your printer.
  • Finish installing the cartridges and close the printer.
  • Connect one end of the printer’s power cord into the printer’s rear port.
  • Connect the other end of the printer’s power cord to an electrical outlet and power up the printer.
  • Stick to the on-screen instructions on the control panel and finish the paper and ink setup.
  • You’ve now completed the hardware setup for the Lexmark X4650 printer.
  • After completing the basic printer settings, install the printer driver on your computer with the help of the software CD-ROM.

Lexmark X4650 Driver Download

  • You can easily download and install the printer driver for your Lexmark X4650 printer for Windows as well as Mac from this page. All you’ve to do is, find and click the Driver Download button given on this page. The file will be downloaded to the computer.  
  • You can also download the driver from Lexmark’s official site. If you want to do so, then follow these steps:

For Windows

  • Launch your preferred web browser and navigate to the printer’s official page.
  • Click on the Drivers tab, select the OS from the drop-down list, and select the driver you want to download.
  • Now, click on the Download button and complete the process.

For Mac

  • Open the Safari browser on your Mac and go to your Lexmark printer’s official page.
  • Click on the Drivers tab, select your OS from the drop-down menu, and choose the printer driver you want to download.
  • Choose the Download button and complete the driver downloading process.

Lexmark X4650 Driver Install

  • Complete the driver download by following the steps provided on this page.
  • Double-click on the downloaded file and agree to the EULA.
  • Follow the on-screen guidance to establish the connection between your printer and the computer.
  • Complete the driver installation on your computer.

Lexmark X4650 Printer Manual

  • Manual is the complete guide to use the printer effectively.
  • To get the manual for your printer, click on the Manual Download button you see on this page. The manual will be downloaded in seconds.
  • Alternatively, you can download the user manual from your printer’s official support page.

How To Connect Lexmark X4650 Printer to Wi-Fi?

  • Insert the software CD-ROM into the device and run the driver installation.
  • During the driver installation, you’ll be prompted to select your connection.
  • Select the Wireless connection option.
  • Follow the on-screen instruction to connect your printer to the wireless network and complete the setup.
  • To connect the printer to Wi-Fi, on your printer’s control panel, select the Settings icon and navigate to the Network Setup option followed by OK.
  • Choose your wireless network from the available wireless networks and enter its password.
  • Wait for the machine to connect to the wireless network. 
  • Finish the setup and run a test page for verification. 

Lexmark X4650 Scan

  • Make sure to turn on your printer and the computer before proceeding to scan.
  • Connect your printer to the computer.
  • Open the top cover of your printer, then place the document or original on the scanner glass.
  • Now close the top cover to begin scanning.
  • Go to the printer control panel and tap Scan Mode.
  • Navigate and select Start Color or Start Black.
  • If you want to save the scan, then select File > Save as in the software application.
  • Type in the file name and file format. Select the location to which you want to save the scanned image.
  • Click Save.

Lexmark X4650 Troubleshooting

On this page, we have provided the troubleshooting steps to fix a few printer issues. For more assistance, contact our support team and get your printer issues fixed in no time.

 

Lexmark X4650 not working in Windows 10

  • Turn on your Lexmark printer and ensure to place the printer near the router in order to reduce any interference.
  • Turn off your printer, router, and computer. Leave the devices idle for three to five minutes. Turn on your devices and try to connect the printer to the network. 
  • Check for any printer driver update. If there is any, update your printer driver and connect the printer to your Windows 10 computer.
  • If nothing works, then either reset your printer or reinstall the printer driver and check whether the issue is solved. 
  •  

Lexmark X4650 Ink Cartridge Error

  • Check for errors or alert messages on the printer’s control panel. Follow the on-screen instructions and resolve the print cartridge error.
  • Check the ink lamp indicator on the operation panel. If the ink level is below the limit, then replace the print cartridge and check whether the error is resolved.