HP NEVERSTOP LASER 1000A SETUP

HP Neverstop Laser 1000A is a single function printer. The HP Neverstop Laser 1000A printer, because of its single Print function, can perform high-speed print jobs. With a staggering printing speed of 21 pages per minute, it is one of the most efficient printers. With the 2.0 USB interface, you can easily connect the printer to your laptop or computer and perform easy printing tasks. For HP Neverstop Laser 1000A setup, follow the below step by step instructions.

HP NEVERSTOP LASER 1000A UNBOXING

  • Unpack the printer from the carton.
  • Remove the protective tapes surrounding the printer.
  • Lift the top cover of the printer and remove the orange plastic handle and the black sheet along with it.
  • Install the input tray that comes along with the printer.
  • Place a stack of paper into the input tray and slide the cover into its place to close the input tray.
  • Pull out the output extension from the top of the printer.
  • Remove the power cord that came along with the HP Neverstop Laser 1000A printer.
  • Connect the plug to the power source and the other end to the rear end of the HP printer.
  • Turn on the printer.

With the use of the HP Smart application, you can complete the full setup. The steps are explained in the coming topic.

Hp Neverstop Laser 1000a Setup

HP LASER 1000A DRIVER DOWNLOAD

 

You have two options to download the driver for the HP Neverstop Laser 1000A printer.

From this page:

Do a click on the Download button on this page and the drive for the HP Neverstop Laser 1000A printer will begin immediately.

From the HP Support page:

  • Open the HP support page for the HP Neverstop Laser 1000A printer.
  • Click the Software, Drivers and Firmware tab on the page.
  • Locate and click the Install button for HP Smart.
 

HP NEVERSTOP LASER 1000A DRIVER INSTALL

  • Since the HP Smart app will help in the easy installation of the HP Neverstop Laser 1000A printer, we will see the steps for it right away.
  • Do a double-click on the HP Smart software.
  • Click the + icon on the app and then select the HP Neverstop Laser 1000A printer.
  • Follow the on-screen commands and complete the driver installation.

HP NEVERSTOP LASER 1000A WIRELESS SETUP

WPS Method:

  • With the Wi-Fi Protected Setup (WPS), you can connect the HP Neverstop Laser 1000A printer to your wireless network. To use the WPS method, you will need to have a WPS supported router.
  • Press & hold on to the Wireless button on the printer (this will start the WPS method).
  • Immediately, you will have to press the WPS button on the router.
  • The HP Neverstop Laser 1000A printer and the wireless router will get connected and the process will take less than a minute.
  •  

Using HP Software:

  • Open the HP printer software installed on your computer.
  • Click on the Tools tab.
  • Click the option Device Setup & Software.
  • Click the option Connect a new device.
  • Follow the on-screen commands and the light in the Wireless Button on the printer will turn blue.

HP NEVERSTOP LASER 1000A USB SETUP

  • Follow below simple steps to know how to setup HP Neverstop Laser printer by USB
  • You can use the USB setup when you have the Installation CD for your printer.
  • Place the installation CD into the drive on your computer.
  • Wait for the Autorun window to open.
  • Do a double-click to start the installation and follow the on-screen commands.
  • When the connection screen opens, select the option for USB connection.
  • This is when you have to connect the USB cable between the computer and the HP Neverstop Laser 1000A printer.
  • Follow the instructions on the computer screen and complete the HP Neverstop Laser 1000A setup by USB.

HP NEVERSTOP LASER 1000A PRINT

  • Turn on your printer and load enough paper.
  • Open the printing document on your computer.
  • Click the File option and select the Print option.
  • Select the HP Neverstop Laser 1000A printer from the printer list.
  • Open the Properties dialog box (it might go by the names Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences).
  • Make the necessary changes you want.
  • Click the OK button and get back to the print dialog box.
  • Select the number of copies.
  • Click the OK button to start the print for your document.
  •  

HP NEVERSTOP LASER 1000A ETHERNET SETUP

 
  • Before proceeding with the Ethernet setup for the HP Neverstop Laser 1000A printer, you need to look at the following and then proceed.
  • Make sure the router has working and available Ethernet ports.
  • Make sure that the computer you are going to work with is connected to the router.
  • Have an Ethernet cable and connect it between the HP Neverstop Laser 1000A printer and the router.
  • Open the default browser and visit the HP page.
  • Download the printer software.
  • Run the installation and complete the setup with the help of the on-screen instructions.
  •  

HP NEVERSTOP LASER 1000A MOBILE PRINTING

The steps are quite simple for mobile printing. Make sure the HP Neverstop Laser 1000A printer is connected to the same network as your smartphone.  

iOS:

  • You can print using the AirPrint feature without the HP Smart app.
  • Open the document to print from your iOS device.
  • Tap the Share button.
  • Select the Print option from the list.
  • Select the HP Neverstop Laser 1000A printer from the printer list.
  • Select the number of copies for the print job.
  • Tap the Print button on the top right corner.
  •  

Android:

  • Download the HP Print Service Plugin from the Google Play Store.
  • Select the document you want to print.
  • Tap the Share option and then select Print.
  • The HP Print Service Plugin will open, select the HP printer from the list.
  • Tap Print.

HP NEVERSTOP LASER 1000A TROUBLESHOOTING

With the HP Neverstop Laser 1000A printer, you will be bound to face some issues. Some of the issues are paper not feeding, the printer going offline, the quality of the print getting poor, or the printer won't start. We will be looking at the solutions for troubleshooting printers issues in the following section.

HP NEVERSTOP LASER 1000A PRINTER OFFLINE

There are a couple of methods to fix the issue when your HP Neverstop Laser 1000A printer is offline.  

Fix 1: HP Print and Scan Doctor:

  • Download HP Print and Scan Doctor from the official support page of HP.
  • Open the downloads section; run the HPPSdr.exe file.
  • Follow the on-screen commands and complete the setup.
  • Click the Yes button when the tool tells you to turn on updates for the printer.
  • Click the Yes button if the tool prompts to set the HP printer as the default one.
 

Fix 2: See What's Printing (Windows):

  • Open the Control Panel window.
  • Click the Devices and Printers option.
  • You will see the list of the printers connected to your Windows computer.
  • Select the HP Neverstop Laser 1000A printer, do a right-click on it, and select the See what's printing? option.
  • Clear all the paused print jobs. 
  • Click the Printer option and click the checkbox to disable option Use Printer Offline.
 

HP NEVERSTOP LASER 1000A NOT TURNING ON

  • A simple reset will fix the issue of HP Neverstop Laser 1000A not turning on.
  • Make sure the printer is connected and the power is turned on for the printer.
  • Simply remove the plug from the power source and wait for 2-5 minutes.
  • Plug it back to the power source and turn on the printer. The HP printer will turn on easily.

HP NEVERSTOP LASER 1000 FIXING POOR PRINT QUALITY

  • There are a couple of factors to look at if the HP Neverstop Laser 1000A’s print quality is poor.
  • Check the ink level in the printer.
  • If you find the ink is low, replace the toner.
  • One more factor to consider is the printer firmware.
  • Download the latest firmware from the official HP support page and run the installation.
 

Windows:

  • Check the paper type and the print settings as given below.
  • Open the HP printer software.
  • Click the Print option.
  • Click the Properties or Preferences option in the software.
  • Click the Paper/Quality tab.
  • Select a higher quality to have good and sharp print quality.
 

Mac:

  • Open the HP printer software.
  • Click File; select the Print option.
  • Select the HP Neverstop Laser 1000A printer from the Printer menu.
  • In Media & Quality, select the paper type.
  • Select a higher quality for sharp print quality.