HP Laserjet Pro Mfp M130fn Wifi Setup | Quick Steps

There are many ways to connect an HP LaserJet Pro MFP M130FN printer to a wireless network; follow this page, and you can get an idea of how to quickly set up the HP printer to a wireless network. You can directly connect the HP printer to a wireless network via the WPS method or with the help of the HP Easy Start software. Let’s see HP Laserjet Pro Mfp M130fn Wifi Setup.

HP Laserjet Pro Mfp M130fn Wireless Setup

Connect the HP printer to a wireless network via the WPS method:

  • Make sure the HP printer is turned ON.
  • Make sure the router is configured, and place the printer within the range of the router.
  • On the printer touch screen control panel, tap the Wi-Fi icon and then tap the Settings icon.
hp laserjet pro mfp m130fn wifi setup
Hp Laserjet Pro Mfp M130fn Wifi Protected Setup
  • Scroll down and then tap Wi-Fi Protected Setup.
  • On the next screen, tap Push Button.
HP Laserjet Pro Mfp M130fn WPS Push Button
Hp Laserjet Pro Mfp M130fn WPS Method
  • Now, tap START to continue.
  • Within two minutes, go on to press the WPS button on your router; if the connection is complete, you can see the Connection Successful message on the printer screen.
  • Finally, tap Print to check the printer status and then tap OK.
  • Now, install the printer driver on your Windows computer and follow the on-screen instructions to complete HP Laserjet Pro Mfp M130fn Wifi Setup.

How To Connect The HP Printer To A Wireless Network Via HP Easy Start?

  • Make sure the printer is turned ON.
  • Check the printer is placed near the router.
  • On your Windows computer, open the default browser and go to the official HP support website.
  • Locate and download the HP Easy Start software from the website.
  • Extract and run the setup file on the Windows computer.
  • On the Ready to set up your printer screen, click Continue.
  • Select both the checkboxes on the Installation Agreement and Settings screen and then click Continue.
  • If the printer is turned ON, your printer will be detected on the Printer Found screen.
  • Make sure your printer model number and the detected printer model number are the same.
  • Select the checkbox for the Enable HP Auto Wireless Connect option and then click Continue.
  • Now, perform the on-screen instructions to complete the HP Laserjet Pro Mfp M130fn Wifi Setup.
  • If your printer is not listed, click My Printer Is Not Shown.
  • On the next screen, check the screen instruction and then click Continue.
  • Now, choose the connection method you prefer.
  • Select the radio button for Wireless network (if applicable) and then click Continue.
  • On the next screen, select the LaserJet printer radio button and then click Continue.
  • Select the Printer with a touch screen control panel radio button and then click Continue.
  • If prompted, temporarily connect the printer and the computer via the supplied USB cable, or click My Printer is Already on Wi-Fi.
  • On the Wireless network setup screen, check the SSID name and then type the password in the Password text field. Now, click Continue.
  • Once the printer is found, remove the USB cable and then click Continue.
  • Now, on the next screen, select the radio button for Full Software and Drivers (Recommended) and then click Continue.
  • Carry out the on-screen instructions to complete the HP Laserjet Pro Mfp M130fn Wifi Setup.
  • Finally, print a test page from the computer.

Hopefully, the HP LaserJet Pro MFP M130FN printer is connected to a wireless network successfully.