HP Envy 6075 Printer Install

Follow simple steps given below for HP Envy 6075 Printer Install. Take out the HP Photosmart 2610 from the carton. The printer package includes the following:

HP Envy 6075 Printer Installing Steps

HP Envy 6075 Printer Install
  • Unpack the printer package and you will see the printer accessories such as power cord, ink cartridges, and printer documents inside it. Take them out of the package.
  • Take out your HP printer from the package and remove all the safety materials, tapes, and other packaging materials.
  • Lift the scanner lid and remove the foam sheet from the scanner glass. Close the scanner lid.
  • Take the printer’s power cord and connect the main end to the power supply.
  • Connect the other end of the power cord to the power port on your HP Envy printer.
  • Turn on the power supply and you will see the printer turn on automatically.
  • Once the printer turns on, the edge lighting on the printer glows purple from the center towards the edge.
  • Pull the paper tray from the printer, then slide the paper guides towards the edges of the tray.
  • Take a stack of paper that doesn’t exceed the maximum limit of the tray and place the paper stack in the tray. Push the tray back into the printer.
  • At the right corner of the printer, you will see a blinking light that indicates the ink cartridge access door. Now, open the ink cartridge access door.
  • Unpack one of the ink cartridges, then remove the protective tape by pulling the orange tab.
  • Lift the cartridge lid, insert the cartridge into its slot, and close the lid.
  • Install the other cartridge into its slot in the same manner.
  • Close the ink cartridge access door.
  • Now, you have to move on to your computer to install the HP Smart app.
  • Connect your computer to the Internet, go to the official HP site from a browser, and navigate HP Envy 6075’s support page.
  • Download the HP Smart app for your operating system.
  • Install the app and then launch it.
  • Follow the instructions to add your printer to the HP Smart app and complete the printer setup.

HP Envy 6075 Driver Download

Without the printer driver, you won’t be able to access it from your device. While installing the printer driver, always prefer to download it from this site or the official HP support page. Installing third-party printer drivers would badly harm your printer. Use these steps to quickly download the HP Envy 6075 printer driver.

  • Click the Driver Download button available on this page.
  • Or else, open a new tab in your browser and go to the official support page of HP Envy 6075.
  • Click on the Software, Drivers and Firmware tab, then choose your operating system on the next page.
  • Scroll down the page and download the printer driver (HP Smart app).

HP Envy 6075 Driver Install

  • Once you have downloaded the HP Smart app (printer driver) to your computer, the installation steps are quite simple.
  • Locate the downloaded file in the Downloads folder on your computer.
  • Double-click the installer and carry out the instructions you see on the screen.
  • After installing the HP Smart app, launch it and add your printer.

HP Envy 6075 Wireless Setup

You can access your HP Envy 6075 printer over a wireless network. Here we have given the easiest method to set up the printer over Wi-Fi, which is the WPS Push Button method.

  • Make sure your wireless router is turned on and has a WPS push button on it.
  • Turn on your computer, connect it to your wireless router, and install the HP Smart app on it.
  • After completing the initial setup of your HP Envy printer, turn it on.
  • To initiate the WPS connection method from your printer, you have to press and hold the Wireless and Power buttons simultaneously for three seconds.
  • As soon as the WPS method is initiated, the edge light on the printer pulses purple at the edges.
  • Now, go to your wireless router and press the WPS button.
  • The edge light on the printer will glow purple when the printer gets connected to the wireless network.
  • Go to your computer, open the HP Smart app, and add your printer to it using the instructions displayed.

HP Envy 6075 Mobile Setup

You can set up your HP Envy printer from your Android or iOS mobile device using the HP Smart app. The steps for the mobile setup are as follows.

  • Complete the initial setup of your printer.
  • Connect your mobile device to your Wi-Fi to which you want to or have connected your printer.
  • Download and install the HP Smart app on your mobile phone from the Google Play Store (Android) or App Store (iOS).
  • After installing the app, open it and tap the Start button.
  • On the next screen, tap the Plus (+) icon to add your printer. When your printer is displayed, select it.
  • Next, select Set Up a New Printer and carry out the steps you see on the screen to complete the setup.

    • HP Envy 6075 Printer Functions:

    The HP Envy 6075 printer can easily perform the Print, Copy, and Scan functions. You can perform all these functions from your device using one app --- the HP Smart app. In the following sections, we shall see the steps to perform each of these functions.

    HP Envy 6075 Print Setup

    • Turn on your printer and computer. See if both the devices are connected and you have installed the HP Smart app on your computer.
    • Load enough paper on your printer.
    • Open the HP Smart app on your computer and select your printer.
    • Now, select the Print Photos or Print Documents option based on the media you are about to print.
    • If you have selected the Print Photos option, then you have to click on the Select Photos to Print option.
    • If you have selected the Print Documents option, then you have to choose your document and then click Print.
    • To change the print settings, click on the More settings option.
    • Finally, after making the changes, click Print.

    HP Envy 6075 Not Printing Issue

    • To resolve the HP Envy 6075 not printing issue from a Windows computer, use these steps.
    • Initially, see if there is an error message displayed on the printer. In case you see any error message, fix it.
    • Check the connection between the printer and computer.
    • Make sure your printer is not offline or paused. Refer to the previous section to fix the printer offline issue.
    • While printing from your computer, make sure you have selected the HP Envy 6075 printer. If not, the printer won’t print your document.
    • Restart the computer and printer and see if the not printing issue is fixed.
    • Still, if the printer is not printing, you can restart the print spooler. Click the Call button on this page and get assistance to restart the print spooler on your computer.

HP Envy 6075 Scan Setup

  • If you have connected your printer to your computer over a network and if this is the first time you are about to perform the scan function, then use these steps to see if scanning to the computer is enabled.
  • Launch the HP printer software on your computer and choose the Scan option.
  • Now, choose the Manage scan to computer option.
  • If the option is not enabled, click the Enable option.
  • If you have already scanned your documents to the computer or if the printer and computer are connected using USB, then the Scan option is enabled by default. Now, scan your document using these steps.
  • Lift the scanner lid on your printer.
  • Load the image or document you want to scan on the scanner glass of the printer.
  • Make sure the print-side of the document is facing down.
  • On your computer, open the printer software.
  • Go to the Print & Scan section and click Scan.
  • Now, click the option Scan a Document or Photo.
  • Go to the Scan Shortcuts section and select your scan type.
  • Finally, click the Scan option.

HP Envy 6075 Copy Setup

  • Place the original document you want to print on the printer’s scanner glass.
  • Load the required amount of paper in the input paper tray.
  • Now, based on the type of copy, you can select the Start Copy Black or Start Copy Color button.
  • Press the button again to increase the number of copies.

HP Envy 6075 Printer Offline

  • To resolve the printer offline issue on a Windows 10 computer, carry out these steps.
  • Check if the printer is turned on.
  • Check the connection between the printer and your computer.
  • For a wireless connection, make sure your router is turned on and functioning.
  • For USB connection, check the USB cable for damage and replace it if required.
  • If there seems to be no issue with the connection, go to your computer and open the Control Panel.
  • Select the Hardware and Sound option followed by Devices and Printers.
  • Now, right-click your HP printer icon and select the option See what’s printing.
  • Click the Printer menu and see if the Use Printer Offline option is selected. In case it is selected, deselect it.
  • Again, click the Printer menu and select the Cancel All Documents and Set As Default Printer options.
  • Now, check if the printer offline issue has been fixed.