HP DESKJET 4155E WIFI SETUP

Setting up a printer over a wireless network enables you to access it from anywhere within the network range. The Wi-Fi setup process is also straightforward, and you can perform it manually without a help of a third person.

Read this page completely to know how to perform the HP DeskJet 4155e Wi-Fi setup process in detail.

Hp Deskjet 4155e Wifi Setup

Connecting “HP DeskJet 4155e” to a wireless network

You can connect your HP DeskJet 4155e printer wirelessly in three different ways.

  • Using the HP Smart app
  • With a router (WPS and printer software)
  • Without a router (Wi-Fi Direct)

All these three methods are simple. In this section, we will show the HP DeskJet 4155e Wi-Fi setup using the HP Smart app and with a router.

Before you begin the Wi-Fi setup, ensure that your printer is turned on and ready for the Wi-Fi setup.

Using the HP Smart app

  • Connect your smartphone or computer to a wireless network.
  • Install the HP Smart app on your device.
  • If you’re using a smartphone, check and enable the Bluetooth option on it.
  • Now, check whether your printer is in Auto Wireless Connect (AWC) setup mode. If not, put your printer in AWC mode.
  • You can verify it by checking the printer display and the light beside the Wi-Fi button. If the Wi-Fi light blinks blue and the Signal Bars cycle the display, your printer's AWC mode is enabled.

Epson XP-7100 Driver Install

  • To put your printer in AWC mode, locate the Cancel and Wi-Fi buttons on the control panel and hold these buttons for three seconds.
  • Wi-fi Buttons On The Control Panel
  • Once the Wi-Fi light blinks blue, release the buttons.
  • Now, open the HP Smart app on your computer or smartphone and follow the on-screen instructions to complete the HP Deskjet 4155e Wi-Fi setup.

With a router

If you wish to connect your DeskJet printer to a wireless network with a router, you can use one of the following methods to complete the setup.

  • WPS Push or PIN method
  • HP Printer software

Using WPS

Both the Push and PIN methods of WPS are straightforward. However, the former is easy to perform, and the following instructions explain the procedure in detail.

  • Turn on your HP printer if it is turned off.
  • Now, put your printer in the WPS Push Button mode.
  • To do so, hold down the Wi-Fi button for three seconds.
  • Now, locate the WPS button on your router and press it.
  • Once your printer is connected to the wireless network, connect the smartphone or computer to the same network.
  • After doing that, use the HP Smart app or the printer software to complete the rest of the HP DeskJet 4155e Wi-Fi setup.

Using the HP printer software

  • Download the recommended HP printer software.
  • Gather your network’s credentials.
  • Run the printer software on your computer.
  • Connect your HP DeskJet printer to the Wi-Fi network by following the prompts displayed on the screen.

Contact us if you need to know more about the HP DeskJet 4155e Wi-Fi setup process.