Hp 419 Wifi Setup

HP Ink Tank 419 is an all-in-one wireless printer that allows you to perform the print, scan, or copy operation over a Wi-Fi or USB connection. The setup procedure of this printer is a straightforward process to perform. This page will guide you in connecting your printer to a wireless router.

Hp 419 Wifi Setup

You can connect the HP 419 printer to a wireless network using the WPS method or the HP printer software. The following section covers both methods in detail.

Before you begin the wireless setup on your printer, ensure the following:

  • The printer’s hardware setup is completed and it is ready for the Wi-Fi setup.
  • You’re using the 2.4 GHz network for the setup.
  • The wireless router has a WPS button.
  • The printer software for your computer is downloaded and ready to install.

Method 1: Using the WPS method

You can use either the Push or PIN method of WPS to connect your printer to the wireless network.

PUSH

  • Turn on the WPS Push mode on your printer. To do so, hold down the Wi-Fi button for three seconds on your printer’s control panel.
Hp 419 Wifi Setup
Hp 419 Wifi Setup
  • Locate the button named WPS on your wireless router and press it.
  • Now, your printer will try to connect to the available wireless network.

PIN

  • Initially, print the network configuration page of your printer. To do so, hold down the Wi-Fi and Information buttons at the same time on your printer’s control panel. 
  • Next, enable the WPS Push mode on your printer. (Refer to the instructions given under the PUSH section to turn on the WPS Push mode).
  • Now, go to your wireless router’s web-based access page or open the software.
  • Click WPS and type the WPS PIN of your printer in the given field.
  • Now, your printer will try to connect to the available wireless network.

The HP 419 Wi-Fi setup is incomplete without the driver installation process. So, connect your Windows or Mac computer to the same network and install the printer driver on it.

Method 2: Using the printer software

If you haven’t installed the printer software, download the driver for your Windows or Mac OS and follow these instructions.

  • Run the installer file on your computer.
  • Select the Wireless option when prompted.
  • Complete the wireless setup by following the on-screen instructions.
Hp 419 Wifi Setup
Hp 419 Wifi Setup

Similarly, if you have already installed the printer software, follow the below instructions to connect the printer to the wireless network.

  • Open the installed printer software.
  • For Windows: Click Tools > Device Setup & Software > Connect a new device > Wireless.
  • For Mac: Open the Applications screen followed by the HP printer folder. Click Setup New Device and follow the on-screen instructions. 

Contact us to know more about setting up your HP 419 printer over a wireless network.