Easy Guide For Epson WF 7710 Setup

The Precision Core powered Epson WF-7710 printer is an All-in-One machine. The versatile printer comes with a 250-sheet tray to ensure utmost productivity. The 4.3” touchscreen ensures easy navigation through all-in-one functions and control. The printer has a print speed of 18 pages per minute for black and 10 pages per minute for color prints. Follow below given steps for Epson WF 7710 setup, wifi setup, driver download and troubleshooting.

Epson Wf-7710 Unboxing Setup

Epson Wf 7710 Setup

CONTENTS:

  • The Epson WF-7710 printer
  • The Installation CD
  • Product document guides
  • Power cord
  • Ink cartridges

We will now see the steps for the hardware and software setup.

Software Setup

  • Make sure that the computer is turned on.
  • Insert the installation CD into the CD/DVD drive.
  • Wait for the Setup installer window to open.
  • Follow the commands on the computer screen and wait for the connection screen to open.
  • Select the connection type you want and complete the full Epson WF 7710 setup.

Hardware Setup

  • Remove the printer from the carton and keep it aside. Remove the protective tapes surrounding the printer body and discard them.
  • Move the printer closer to the computer and within the range of the wireless router.
  • Open the scanning unit and take out the packaging material present inside; close it.
  • Connect the power cord to the printer and the main power source.
  • Raise the control panel and press the Power button to turn on the Epson WF-7710 printer.
  • Lift the scanner unit and open the ink cartridge cover on the right.
  • Unpack the ink cartridges one by one and make sure that you remove the yellow protective tape from the bottom.
  • Insert the ink cartridge into the respective color slot and push until it clicks into place (Repeat the same step for other ink cartridges).
  • Wait for the printer to charge the ink.
  • Pull the paper cassette from the bottom of the printer and move the paper guides to the sides inside the tray.
  • Place a stack of paper inside the paper cassette and adjust it accordingly.
  • Adjust the paper guides according to the paper and then slide the cassette back into the printer.
  • Connect a phone cord to the LINE port of the printer and to the phone wall jack (Optional).
  • Tap Proceed to complete the fax setup. The Epson WF 7710 setup is complete.

Epson Wf-7710 Driver Download

  • Click on the Driver Download button.
  • The driver will be downloaded immediately.
  • One more way to download the printer driver is from the official Epson support page.

  • Open the support page for the Epson WF-7710 printer.
  • Click the Downloads tab.
  • Click the Operating System drop-down list, select the OS based on the computer you are using, and click GO.
  • Go to the Recommended For You section, click on the Download button for Drivers and Utilities Combo Package Installer.

Epson Wf-7710 Driver Install

If the computer you use does not have a CD drive, you need an internet connection to download the drivers for the Epson WF 7710 setup.

  • Download the driver from the steps provided above.
  • Run the installation and follow the on-screen prompts.
  • When the connection screen opens, select one of the three options provided on the page: Wireless, Direct USB, and Wired Network connection.
  • Follow the on-screen instructions for your connection type and complete the driver installation.

Epson Wf-7710 Manual Download

  • On this very page, click on the Manual Download button and complete the Epson WF-7710 manual download.
  • An alternative way to download the manual for the printer is from the support page.
  • Open the Epson WF-7710 support page.
  • Click the Manual and Warranty tab.
  • Click on the PDF button for the manual.
  • The manual will open on a new page.
  • Click on the Download icon to download the manual and proceed with Epson WF 7710 Setup steps.

How To Connect Epson Wf-7710 Printer To Wifi?

  • Press the Home button on the printer control panel.
  • On the display, you will find two options.
  • Select Router > Start Setup.
  • Choose the name of your wireless network from the list on the printer display.
  • Enter the password for your wireless network using the virtual keypad and then select OK.
  • Choose Start Setup to confirm the settings.
  • Select Print Check Report to print a network report. Press Home to exit.

How Do I Connect My Epson Wf-7710 To My Computer?

In case the wireless setup turns out to be unsuccessful, you can opt for the wired one.

  • Go back to the installer to complete the setup.
  • Select the Direct USB Connection option.
  • NOTE: The USB cable is not provided with the printer.
  • The installer will now ask you to connect the USB cable.
  • So, connect a USB cable between the Epson printer and the computer.

Epson Wf-7710 Scanner Setup

How To Scan Epson Wf-7710?

    There are two ways to scan using the Epson WF 7710 setup printer.

  • Scan from the scanner glass (print side facing down)
  • Scan from the Automatic Document Feeder (print side facing up)
  • After placing the original on the scanner glass or the ADF, follow these steps:

  • Press the Scan option on the screen.
  • Select one of the Scan To options.

Epson Wf-7710 Scan To Computer

  • Place the original document on the scanner glass.
  • Press the Home button on the control panel.
  • Select Scan.
  • In the Scan to section, select the Computer option.
  • Choose the computer on display and press the Scan button.
  • The scanned document will be saved to the computer.

Epson Wf-7710 Scan To Email Setup

  • Place the original document in the ADF.
  • Press the Home button and select Scan.
  • Swipe through the options in the Scan to section and select Email.
  • Choose the Keyboard option on the display and enter the recipient address; press OK once done.
  • Pick the Scan Settings tab and make changes if necessary.
  • Press the Send icon.
Epson Wf 7710 Scanner Setup

Epson Wf-7710 Print Head Replacement

  • Make sure that the Epson WF 7710 setup printer is turned off.
  • Open the scanner unit.
  • The print head will come to its optimal position.
  • Open the print head cover and keep it aside.
  • Gently remove the ink cartridges present inside.
  • Take a small screwdriver and gently remove the screw from the slot.
  • Hold both the sides of the color panel and pull it; keep it aside.
  • Use the screwdriver and remove the black panel from the inside.
  • Now, you will see that the print head is secured by three screws. Use the screwdriver and remove them all; keep the screws safely.
  • Gently hold the white cable inside and slowly lift it. Unplug the cable from the print head.
  • Have a new print head ready.
  • Connect the white cable to both sides of the new print head and place it inside firmly.
  • Return the screws to their positions and secure them tightly.
  • Replace the panel and position the cartridge reader into its place. Screw it tightly.
  • Place the ink cartridges in the respective color slots.

Epson Wf-7710 Problems

There might be some issues with the Epson WF 7710 setup. Here are some topics with the troubleshooting steps.

Epson Wf-7710 Printing Blank Pages

  • Ensure that you have the proper paper settings for printing your document.
  • If a blank page exists in the document you are printing, click on the Skip Blank Page button in the printer software.
  • Check for clogged nozzles and clean the print head if necessary.

Clean The Print Head

  • Press the Home button on the control panel.
  • Select Settings > Maintenance > Print Head Cleaning.
  • Select the All Colors option and press the Start button.
  • The print head cleaning will take a couple of minutes.

How Do I Reset My Epson Wf-7710 Printer?

If you undergo any problem with the Epson WF-7710 printer, the best solution is to reset the printer.

     On the control panel display, select Settings > General Settings > System Administration > Restore Default Settings.  Select Yes to confirm the selection.  The Epson printer will be reset.

Epson Wf-7710 Error Code

If the Epson WF-7710 printer goes through certain issues, it will display some error codes. Few error codes are given below:

  • 001: The printer was abruptly turned off.
  • 109: The fax was already deleted.
  • 110: The loaded paper does not match 2-sided printing.
  • 201: The printer memory is full.
  • 202: The fax line was disconnected.
  • 203: The Dial tone is not detected.
  • 204: The recipient fax machine is busy.
  • 205: The recipient fax machine does not answer.

For more assistance on Epson WF 7710 Setup and troubleshooting, feel free to contact our technical experts.