Connect Lexmark Printer To Wifi Without Cd

Connect Lexmark Printer To Wifi Without Cd

Usually, you can connect your Lexmark printer to Wi-Fi without using any CD-ROM. If you wish to connect your printer to Wi-Fi using the CD, you need to run the driver installation process on your computer. Otherwise, there will be no need to run the setup CD. These are the simple methods using which you can connect your printer to Wi-Fi without a CD.

  • WPS Push Button Configuration
  • WPS PIN

Keep reading the instructions below to know how to connect your Lexmark printer to Wi-Fi using these methods.

Method 1: Using the Push Button Configuration

  • First, turn on your printer and router.
  • Place your printer close to your router.
  • Remove any wireless device near your router because it will help reduce Wi-Fi interference.
  • Go to your printer control panel and select the Network/Ports option.
  • Choose Network –> Setup –> Wireless –> Wireless Connection Setup.
  • Select Wi-Fi Protected Setup –> Start Push Button Method.
  • Carry out the instructions on the LCD.
  • On your router, press the WPS button. Hold the button until all the LEDs on the router flash.
Connect Lexmark Printer To Wifi Without Cd
Connect Lexmark Printer To Wifi Without Cd
  • Wait for your printer to connect to your wireless network.
  • Once the connection is made, connect your computer to the same wireless network.
  • Download the printer driver from the official Lexmark site and run the installation.

Method 2: Using WPS PIN

The WPS PIN method is somewhat similar to the WPS Push Button Configuration method, but you have to use the Wi-Fi credentials provided by your printer. Keep reading the instructions to know how to connect your Lexmark printer to Wi-Fi without CD.

  • To begin with, turn on your Lexmark printer and select the Network/Ports option on the LCD.
  • Choose Network –> Network Setup –> Wireless –> Wireless Connection Setup –> Wi-Fi Protected Setup.
  • Select the Start PIN Method option and note down the eight-digit WPS PIN displayed on the LCD.
  • On your computer, open the default browser and enter your router’s IP address in the URL field. Hit the Enter key to open the router setup page.
Connect Lexmark Printer To Wifi Without Cd
Connect Lexmark Printer To Wifi Without Cd
  • If prompted, enter the login credentials.
  • Go to the WPS settings and enter the eight-digit WPS PIN provided by your printer.
  • Save the settings before you log out from the router setup page.
  • Now, your printer and computer will be connected over the same wireless network.
  • After connecting your Lexmark printer to Wi-Fi, proceed to install the driver without the CD.
  • Download the driver from the official Lexmark site and run the installation process.
  • Agree to the EULA and choose the Wireless Network Connection option as your connection type.
  • Finish the driver installation by following the on-screen instructions.

Now, check if the Canon printer error code 306 is fixed. If not, contact us.