CANON TS6220 SUPPORT CODE

Canon TS6220 is a wireless multifunctional printer ideal for everyday printing needs. Usually, this printer works well without any problem. However, if an error occurs, a specific number will appear on your printer's touchscreen and computer. This number is called "Support code." When your printer starts to malfunction, check if it displays any support code on its touchscreen and the computer. Then, you can rectify the problem with the appropriate solution.

Support Code 1300

On this page, we have listed the frequently occurring support codes on your Canon TS6220 printer and the appropriate solutions to fix them. Now let us move into the topic.

1300

  • If there is a paper jam in the paper output slot/rear tray, the support code 1300 will be displayed on your printer's touchscreen. In those instances, you should remove the jammed paper from the paper output slot and the rear tray.
  • Reload the paper and resume printing by selecting OK.

1303

  • If there is a paper jam in the cassette, you will encounter the support code 1303. To fix this issue, extend the paper cassette and discard all the jammed paper.
  • Reload a stack of paper and resume your printing job.
Support Code 1000

1304

  • If the paper is jammed when you perform automatic duplex printing, you will encounter the error code 1304.
  • To rectify this problem, remove the jammed paper from the specific area and reload the sheets.

1000

  • This support code occurs when there is a problem with paper feeding. If there is no paper in the rear tray or the paper is incorrectly loaded in the rear tray, you will encounter the error code 1000.
  • To fix this problem, load sufficient paper into the rear tray and align the guides against the loaded stack and select OK on your printer's touchscreen.

1003

  • If there is no paper in the cassette or the paper is not loaded correctly, you will probably end up with the error code 1003.
  • To fix this problem, load a fresh stack of paper into the cassette and adjust the paper guides against the loaded paper. Finally, select OK on your printer's touchscreen.

1200

  • If the scanning unit is open, you will see the error code 1200. You just need to close the scanning unit to rectify this error code. In case you are replacing an ink tank, complete the process and then close the scanning unit.

1401

  • If the print heads are damaged, you will face the error code 1401.
  • In most instances, a power cycle can help you fix this problem. To do so, turn off your Canon printer and disconnect its power cable. After a minute, reconnect the power cable and turn on your printer.
  • If the issue is not resolved, you need to replace the print heads.

1600/ 1688

  • When your printer runs out of ink, you will end up with 1600 or 1688.
  • To fix this problem, you should replace the ink cartridges with new ones.

1660

  • If you install a third-party ink cartridge on your Canon TS6220 printer, you may probably end up with the error code 1660.
  • Replace those third-party ink cartridges with genuine Canon cartridges and see if your issue is resolved.

1890

  • During transportation, you should have secured the print head with the tapes. However, if you start printing with those tapes, you will probably end up with the error code 1890.
  • To fix this problem, open the scanning cover and remove the tapes. Then close the scanning unit and ensure that the issue is resolved.
Support Code 2110

2110

  • If the loaded paper type doesn't match the paper settings, you may encounter the error code 2110.
  • Make the necessary changes in the paper settings and resolve the issue.

2901

  • Once you print the print head alignment pattern, you need to scan it.
  • If you delay in scanning the pattern, you will end up with the error code 2901.
  • To fix this problem, open the scanner glass and load the printed alignment pattern. Close the document cover and select OK.
  • Once your printer scans the alignment pattern, the support code will automatically disappear.
Support Code 5200

4103

  • If your printer cannot print documents with the current settings, you will encounter the error code 4103.
  • To fix this problem, cancel the printing job by pressing the Stop button. Reconfigure the settings and ensure that the error code has disappeared.

5011/ 5012/ 5100/ 5200/ 5B00/ 6000

  • When a printer error has occurred, you will end up with any of the following error codes: 5011/ 5012/ 5100/ 5200/ 5B00/ 6000.
  • To fix this problem, go to the Devices and Printers section and cancel all the print jobs you have sent to your printer so far.
  • Turn off your printer and disconnect the power cord from your printer's rear port and the electrical outlet. After a minute, reconnect the power cord to your printer and the electrical outlet. Then, turn on your printer and check if your issue is resolved.

If you need assistance in resolving any of these error codes, you can reach our technical experts.