How To Get Canon Selphy CP1300 Install?

The Canon Selphy CP1300 printer uses the Dye-sublimation thermal transfer printing technology. The printing speed of this printer is approximately 47 sec (postcard), 39 sec (L Size), or 27 sec (card). To install your printer for the first time, carry out the simple steps given below to get Canon Selphy CP1300 Install. 

Canon Selphy CP1300 Setup


  • Unpack your printer and check if the following items are included in the package.
  • Power adapter and power cord
  • Paper cassette
  • Printed matter

Load the ink cassette

  • Check if the ink cassette size matches the paper size that you will use.
  • Lower the ink cassette compartment cover and place the ink cassette.
  • Close the printer’s ink cassette compartment cover properly.

Load the paper cassette

  • Open the outer cover followed by the inner cover.
  • Unpack the paper cassette and place some paper.
  • Close the inner cover and then open the paper cassette compartment cover.
  • Place the paper cassette in the compartment.
Canon Selphy CP1300 Install

Turn on your printer

  • Connect the power adapter cord between the printer and a power outlet.
  • Turn on the Canon Selphy CP1300 printer.

Set a display language

  • Select the Setup option and press OK.
  • Choose the Printer Setup option and press OK.
  • Set the language and then press the OK button.

Install the printer software

Download the printer driver and install it on your computer.


  • To download the Canon Selphy CP1300 printer driver, click the Driver Download button available on this page.
  • Alternatively, visit the official Canon website and download the printer driver.


  • Download the Canon Selphy CP1300 printer driver from this page or the official Canon website.
  • Double-click the installer and then follow the steps on the screen to install the Canon Selphy CP1300 driver download on the computer.


  • Select the Wi-Fi icon and press the OK button on the Canon Selphy CP1300 printer.
  • Choose the Connection Method option and press OK.
  • Select the Direct Connection option and press the OK button.
  • Choose the On option and press OK.
  • You will see the current password on the LCD panel. If necessary, change it and press the OK button.
  • Wait until you see the Connect target device to the displayed access point and print message.
  • You can now use the displayed SSID and password to establish a wireless connection between your device and the Canon Selphy CP1300 install.


  • Download and install the Canon Selphy CP1300 printer driver on your computer.
  • While installing, select the USB connection option and click Next in the Choose a connection method window.
  • When prompted, you have to connect a USB cable between the computer’s USB port and the printer’s USB port.


  • Ensure that the Canon Selphy CP1300 printer is turned on.
  • Make sure you have installed the correct printer driver on your computer.
  • Load enough paper in the paper cassette.
  • On the computer, open an image for printing and access the printing dialog box.
  • Check if your printer is selected.
  • Set the paper size.
  • Specify the orientation and the number of copies you wish.
  • Click the Print option to print the image according to the specified print settings.


  • Make sure the printer is turned on.
  • Check if the paper and ink cassettes are placed correctly.
  • The ink sheet must not be loose.
  • Ensure that you are using the paper that is designed for Selphy.
  • If necessary, replace the ink cassette and load the paper cassette again.
  • Lastly, make sure you are using the correct combination of paper, paper cassette, and ink cassette.
  • Now, you will finish the Canon Selphy CP1300 install process.