Canon Mb2720 Setup

Canon Maxify MB2720 is a wireless all-in-one printer that is designed to meet your personal and professional needs. It is popular because of its paper handling and good printing quality, solid speed, and convenient printing features that enable you to print quickly and save money. It is easily affordable since its cost is low.

Canon Mb2720 Setup DOWNLOAD:



  • Unpack the printer from the package.
  • Take out the printer, power cord, documents, cartridges from the box. 
  • Remove the protective tapes and covers.

Driver Download

  • Go to the Canon MB2720 support website and find your printer.
  • Click on Drivers and Downloads.
  • Choose your Operating System and Installer Language.
  • Click on Drivers and Downloads.
  • Scroll down and choose the Drivers tab.The list of recommended drivers will be auto-detected. If not, you can manually select your operating system and installer language.
  • Download the driver.
  • Click on SELECT and save the driver on your computer.
  • Install the driver.
  • Once downloaded, locate the. EXE file and double-click and follow the prompts to install.

Cartridge Installation

  • Plug the electrical cord, turn ON the printer and follow the on-screen instructions.
  • Open the printer cover and stay still until the print head stops.
  • Remove the Black ink tank from the package.
  • Now, insert the ink tank into the print head holder and press until it snaps.
  • Repeat the same process to install other ink tanks into the print head holder.
  • Follow the pattern while installing the ink tanks from left to right.
  • Make sure the ink tanks are installed into the print head holder properly.
  • Close the front cover.

Load Paper into The Cassette:

  • First, pull the cassette completely out of the printer.
  • Slide the paper guides to the end of the cassette.
  • Load the paper stack into the cassette with the glossy side facing down.
  • Adjust the paper guides to hold the edges of the paper.
  • Now insert the cassette completely into the Canon MAXIFY MB2720 printer.

Steps to perform Canon MB2720 wifi setup:

  • Connect your power cord between the printer and power socket and turn it on.
  • Go to the control panel on your printer and press the Home button.
  • Press LAN Settings followed by Wireless LAN Setup.
  • Under the LAN Setup option, select Wireless Setup and then press OK.
  • Insert the Canon Maxify MB2720 setup disk that came along with the product into the computer’s CD drive. 
  • If there is no CD, then download the Canon MB2720 driver from the Canon official site.
  • Click on the downloaded file and click the Start Setup option.
  • Click on Wireless LAN connection.
  • Choose the connection type as Connect via Wireless router (recommended).
  • After installing the Canon MB2720 setup software, add your Canon MB2720 printer.

Steps to perform the USB connection

If required, use the USB connection to print documents and photos.

  • Turn on the printer and your computer.
  • Insert one end of the USB cord to the printer and another end to one of the USB ports of your computer.
  • Open the Start Setup page on your computer.
  • Click on Next on the first screen and choose the connection method as USB connection.
  • Now, add your printer to the computer and select the sample document.
  • Try a test print.