Canon Pixma IP2600 is a photo InkJet printer. You can print photos at a maximum resolution of 4800 x 1200 dpi, thus you can get perfect photo prints. The specially engineered pigment black ink delivers clear, top laser-quality text with easy readability and higher resistance to smudging.
To perform the Canon Pixma IP2600 printer setup, you must first start with the Hardware setup.
(Repeat the same step for the other FINE ink cartridges and close the top cover of the printer)
Conclude the Canon Pixma IP2600 printer setup with the Software setup.
If you want to perform printer tasks from the computer, the best way is to download the printer driver. You can easily download the driver from this page or the official Canon support page.
Your Canon Pixma printer is compatible with Windows 8, Windows 7, Windows Vista, Windows XP/2000, and Mac OS X v. 10.3.9 to 10.5.x4.
The Canon Pixma IP2600 printer does not support wireless printing. However, you can connect the Canon printer to the computer with the help of a USB cable.
The USB interface is the only way with which you can connect the Canon printer to the computer. The steps are as follows.
Paper Jam in the Output slot or the Rear tray:
Cause:
The error light shows that the Canon Pixma IP2600 printer does not have any paper in the rear tray.
Solution:
Load the Canon-supported paper into the rear tray.
Cause:
The printer cover is open when the print job is in progress.
Solution:
Remove the paper and make sure that the paper does not tear.
Cause:
Fine Cartridge is not installed properly.Solution:
Remove the output tray extension and then the paper output tray. Remove the Fine cartridges.
Install the Fine cartridges properly until you hear the clicking sound.
Close the cover.
Cause:
The Fine Cartridge is not properly installed.
The incorrect Fine Cartridge was installed.Solution 1:
Open the printer’s output tray extension and the paper output tray. You have to place the Fine Cartridge into the slot and then push it down until it clicks.
Solution 2:
Install the appropriate Fine Cartridge based on the Canon printer.
Cause:
The Ink Absorber is almost full.
Solution:
Press the Black or Color button on the Canon Pixma IP2600 printer to continue printing.
Cause:
The protective tape on the Cartridge is still not out of the Cartridge.
Solution:
Cause:
Paper settings are incorrect.
Solution:
Press the Stop button on the Canon Pixma IP2600 printer.
Make changes to the media type and the print settings on the installed printer driver.
Cause:
The specified document cannot be a printer.
Solution:
Make sure you have the genuine Fine ink cartridges installed properly on the Canon printer; continue printing.
Cause:
The ink may have run out.
Solution:
Cause:
The Fine Cartridge cannot be recognized.
The Fine Cartridge is not properly installed in the printer.Solution:
The printer does not want to use an unauthentic Fine cartridge.
Cause:
The Fine Cartridge cannot be recognized.
Solution:
Replace the Fine Cartridge will a Canon authorized one.
Cause:
Ink in the Cartridge has run out.
Solution: